Set Acoustic Signal; Set Tolerance Display - KERN PES Serie Betriebsanleitung

13.6 Set acoustic signal

13.7 Set tolerance display

Whether a measured weight value is within certain limits is indicated on the display by
an arrow on the left side (see table below or chap. 13.4).
Evaluation of the
weight value
Upper tolerance limit
exceeded
Within the tolerance
range
Lower tolerance limit
not reached
46

In the menu navigate from <25. bu. 1> to <29.
bu. 5> navigieren (Navigation in the menu: see
chap. 8.3)
Signal for rank 1 or " - "
25. bu. 1
Signal for rank 2 or " TOL ✓ "
26. bu. 2
Signal for rank 3 or " + "
27. bu. 3
28. bu. 4 Signal for rank 4
29. bu. 5 Signal for rank 5

Select desired setting
0 Acoustic signal deactivated
1 Acoustic signal activated
Set tolerance ranges
1 Limit
TOL

-
TPES-B_TPEJ-B-BA-def-2319
from 2 limits
+
TOL

-