Technical Data - JVC KD-NX10 Bedienungsanleitung

Technical data

AUDIO AMPLIFIER SECTION
dfgTechnical data
Maximum Power Output:
Front: 30 W per channel
Rear: 30 W per channel
Continuous Power Output (RMS):
Front: 12 W per channel into 4 Ω, 40 Hz to 20 000 Hz
at no more than 0.8% total harmonic distortion.
12 W per channel into 4 Ω, 40 Hz to 20 000 Hz
Rear:
at no more than 0.8% total harmonic distortion.
Load Impedance:
Tone Control Range: Bass :
Treble :
Frequency Response: 40 Hz to 20 000 Hz
Signal-to-Noise Ratio: 70 dB
Line-In Level/Impedance: 1.0 V/20 kΩ
Line-Out Level/Impedance: 3.0 V/20 kΩ load (full scale)
182
4 Ω (4 Ω to 8 Ω allowance)
±10 dB at 100 Hz
±10 dB at 10 kHz
TUNER SECTION
Frequency Range: FM: 87.5 MHz to 108.0 MHz
AM: (SW) 5 800 kHz to 6 250 kHz
[FM Tuner]
13.3 dBf (1.2 µV/75 Ω)
Usable Sensitivity:
Alternate Channel Selectivity (400 kHz):
65 dB
Frequency Response: 40 Hz to 15 000 Hz
Stereo Seperation: 35 dB
Capture Ratio: 1.5 dB
[SW Tuner]
20 µV
Sensitivity:
[MW Tuner]
20 µV
Sensitivity:
Selectivity: 60 dB
[LW Tuner]
50 µV
Sensitivity:
(MW) 531 kHz to 1 620 kHz
(LW) 153 kHz to 282 kHz