Scan Search; Programme Filtering For Fm Das; Programme Type Selection (Pty) - JVC KD-NX10 Bedienungsanleitung

Scan search

On the desired waveband (
, ) press the right rotary
LW SW
control .
appears on the display.
An automatic station search will be initi-
ated. The first run is performed on an in-
sensitive plane, all further runs on a
sensitive plane. Receivable stations will
remain audible for 8 seconds. If you
wish to store one, press the right-hand
rotary control .
Note:
With Seek Quality
Name , Scan Search is conducted in al-
phabetical order.
Programme filtering for FM
, ,
FM MW
DAS
You have the option of filtering various
stations from the FM DAS station list.
Requesting radio menu mode.
Press the
The individual programmes can be se-
lected using the right-hand rotary
control . By pressing the right rota-
ry control
(programme unfiltered) and
Play
Skip (programme filtered out).
and Seek
To turn the filter function on or off, press
the multifunction button
ly to turn the filter function on (
) or off (
on No Fil
multifunction button.
, you can choose between
repeated-
Fil
).
Radio operation
Programme type selection
(PTY)
Requesting radio menu mode.
Press the multifunction button.
Afterward, select the desired PTY (see
also page 178) using multifunction
button .
Note:
Only the currently available PTYs can
be selected.
Once a PTY has been selected, only
those stations can be selected in FM
DAS mode that are provided with this
PTY.
If you select NO PTY in FM-DAS
mode, all stations will once again be
displayed.
151