Tp Announcement Volume; Switching Tmc On/Off; Selecting Tmc Station - JVC KD-NX10 Bedienungsanleitung

Radio operation

TP Announcement volume

Selecting TP Menu.
Press the multifunction button.
With the right rotary control
different settings ( 0 - +3 ) can be se-
lected.
This means that the volume can be
raised by a fixed amount depending on
the setting.
• Setting 0 - no increase
• Setting +1 - slight increase
• Setting +2 - moderate increase
• Setting +3 - strong increase
158

Switching TMC on/off

Note:
Further information on TMC can be
found under "Dynamic route guidance
with TMC" on page 133.
Activating TP Menu.
, four
Switching on:
Press multifunction button
peatedly until TMC on
Switching off:
Press multifunction button
peatedly until
TMC off
Note:
With the TMC switched off, no dynam-
ic navigation functions (Dynamic
Route, Traffic Information) can be se-
lected or called up.

Selecting TMC station

To improve the reception of TMC traffic
announcements, you can select a station
that transmits the TMC data.
Switching on TP menu.
Press the
Use the right-hand rotary control
to select the desired TMC station.
re-
The selected station is adopted and set.
appears.
Note:
You can then also select another station
re-
again without TMC. However, this
appears.
eliminates the advantage of the set
TMC-station.
multifunction button.