Selecting Navigation; Main Navigation Menu - JVC KD-NX10 Bedienungsanleitung

Selecting navigation

Press .
The main navigation menu appears after
this display.
Note:
The navigation CD must be loaded
when starting navigation mode for the
first time.
If calibration of the navigation system
has not yet been completed, the system
will prompt you to take a drive for cali-
bration. See "Calibration" on page 199.
A navigation CD containing the data for
the target country is required for navi-
gation mode.
The navigation CD must be inserted to
start the calculation of a route. During
calculation, the prompt CD will flash in
the display. Once calculation is com-
pleted, the prompt CD will disappear,
the navigation CD can be removed and
an audio CD may be inserted.
When entering destinations, driving off
should be delayed until the prompt
disappears.
Navigation operation

Main navigation menu

Select from
DESTINATION ,
DEST. MEMORY ,
P.O.I. ,
LAST DESTINATIONS
by turning the right rotary control
and confirm your choice by pressing it.
• DESTINATION
Accesses the entry menu for the desti-
nation.
See "Destination entry" on page 120.
• DEST. MEMORY
Contains previously stored destina-
tions.
See "Destination
CD
page 139.
• P.O.I.
Menu for selecting regional and inter-
regional destinations of special inter-
est and local points of interest. Points
of interest include petrol stations, air-
ports or hospitals, for example. See
"P.O.I." on page 139.
,
memory" on
119