Temperature Protection Circuit; Notes On Cd-R And Cd-Rws; Notes On Copy-Protected Cds - JVC KD-NX10 Bedienungsanleitung

Temperature protection circuit

To protect the laser diode from exces-
sive heat, a two-stage temperature pro-
tection circuit is integrated into the unit.
When the first temperature threshold of
this protection circuit is activated, the
following display is given.
CD mode continues. However, if possi-
ble the system should be switched to a
different operating mode.
When the second temperature threshold
is activated, the following display is giv-
en for 8 seconds.
The unit switches to the operating mode
selected before CD mode was activated.
After a cool down period, the CD mode
may be called up again. If the tempera-
ture is still too high, the unit will once
again switch back to the previously se-
lected signal source.

Notes on CD-R and CD-RWs

You can play CD-Rs (recordable CDs)
and CD-RW (rewritable CDs) on this
unit, but please comply with legal re-
strictions. These restrictions may vary
from one country to another.
Depending on the recording device used
to record the CD-R/CD-RW and / or the
CD-R/CD-RW itself, it may not be pos-
sible to play some CD-Rs/CD-RWs on
this unit.
CD operation

Notes on copy-protected CDs

In some cases, problems may arise when
attempting to play copy-protected CDs,
such as long reading times or a total ina-
bility to perform playback.
163