Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
24/38
Bosch Rexroth AG | Bedienoberfläche Schweissen / Resistance welding user interface VCP05.2 | R911172348
To this product
5
To this product
The present operating and programming manual makes reference to the manual
Rexroth IndraControl VCP 05.2
which provides basic information on the use of the small operator terminal
VCP05.2:
• Introducing the system
• Important directions for use
• Safety instructions for electric drives and controls
• Technical data
• Dimensions
• Display and operating components
• Interfaces
• Maintenance and installation
The present operating and programming manual additionally describes the
resistance welding user interface which is installed on the
VCP05.2 operator terminal with RS232 serial programming interface,
type VCP05.2DSN-003-SR-01-PW (part number R911.328.207),
in the following referred to briefly as VCP05.2/RS232.
Special features of the
VCP05.2 operator terminal without RS232, with Ethernet,
type VCP05.2DSN-003-NN-01-PW (part number R911.328.208),
in the following referred to briefly as VCP05.2/ETH,
will be dealt with separately.
R911310377
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
