Operating Procedure
Press the Execute key to start the BH
START
program.
H
Note
The position of the No.1 hole is displayed.
The bolt circle mode LED flashes.
Move the X- and Y-axis scales so that the
display becomes "0".
START
Press the Execute key.
H
The position of the No. 2 hole is displayed.
START
After processing of the last hole is finished,
press the Execute key to End the operation.
H
Display
BH/ARC
Lights up
After approx. 2 seconds
BH/ARC
Flashes
BH/ARC
Lights up
BH/ARC
Lights up
33