Inhaltsverzeichnis
Werbung
Before Use
Remove all packaging from the unit and the accessories. Do not leave packaging
materials lying around; plastic bags may become a deadly toy for small children.
Clean all parts as described in the chapter "Cleaning".
Assembling
1. Press the Push releasing button (2) and lift up the
lifting arm until the lifting arm engages in place.
2. If you want to use the splash guard cover (10),
place the lid from below into the motor unit, as
shown in the fig. on the right. Liquid ingredients
can be poured through the opening in the splash
guard cover.
3. Mount the desired mixing accessory (7, 8 or 9) via
the provided bayonet lock into the motor unit.
Engage the mixing accessory by inserting and
pressing it upwards until the spring moves slightly
back and then turn clockwise to fix it in place.
Make sure the mixing accessory is properly
mounted.
4. Place the mixing bowl (6) into the base (5). For
engaging the mixing bowl turn it clockwise until
the protruding parts on the bowl fit into the provid-
ed notches on the base.
5. Press the Push releasing button (2) again in order
to disengage the lifting arm and move the lifting
arm down.
6. Insert the power cord into a wall socket. The
stand mixer is now assembled and ready for oper-
ation.
Using
17
Werbung
Inhaltsverzeichnis
