Start-Up And Operation; Using The Air Compressor - Westfalia 64 77 19 Bedienungsanleitung

Using the Air Compressor

Take the 12 V power cable (7) out of the compartment on the underside of
the unit. After that, slide the cover (1) to the left (arrow) and take out the
pressure hose.
Set the switches (4) and (8) to their OFF positions.
Connect the 12 V power plug to the 12 V cigarette lighter socket in your
vehicle.
Under the unit to the right hand side (5) are two adapters for balls (e.G.
footballs or volley balls). These can be attached to the air pressure hose.
Open the locking lever on the connecting piece and insert the adapter into
the connecting piece. After that, close the lever.
For filling a motor vehicle tyre no adapter is needed. Attach the air pressure
hose to the valve (open lever, attach connecting piece to valve, close
lever).
Automatic Turn-Off Function
With the bezel (6) around the pressure scale the desired pressure can be
preset (up to 7 Bar / 100 PSI). After the set pressure has been reached, the
compressor automatically turns off. To deactivate this function, turn the ring
clockwise as far as it will go (position "Bypass"). Now the compressor will
deliver approximately 17 Bar (250 PSI).
Please Notice! Do not turn the bezel (6) while the compressor is operating!
Start up the compressor by setting the switch (8) to "Compressor". If you
have set the automatic turn-off function, the compressor will turn off at the
preset pressure. If the automatic turn-off has not been set, manually turn off
the compressor by setting the switch (8) to OFF.

Start-Up and Operation

6