Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Note: Switch OFF immediately the reciprocating saw,
-
if smoke or sparks are observed coming from or around the collector
resp. the rotor,
-
if the reciprocating saw does not function properly or only intermittently
when the plug, power cable, cable sleeve or switch are toggled,
-
if smoke or a strong smell of burned insulating material is observed,
-
if the saw blade comes loose, is crooked or damaged,
-
if the motor runs irregularly or jams.
-
if the saw blade jams. Open the sawn split in the workpiece in slightly and
extract the saw blade. Do not try to finish the cutting action with a jammed
saw blade to avoid injury or damaging the reciprocating saw and the saw
blade.
Changing the Carbon Brushes
Two carbon brushes are included in delivery.
1. Please note: First unplug from power mains!
2. To change the carbon brushes, first remove the caps on the upper side and
the bottom side of the reciprocating saw.
3. Remove the old carbon brushes and insert the new one. Tighten both caps
firmly. Always remove both carbon brushes at the same time.
Changing the Carbon Brushes
14
Werbung
Inhaltsverzeichnis
