Inhaltsverzeichnis
Werbung
General Description
The gun is highly suitable for the low-cost use of polyurethane foam
bottles generally available on the market. Since it's possible to
regulate the flow of material, the gun is suitable for controlled
spraying and accurate tilling of joints, making it fast, simple, accu-
rate and safe to mount components such as door and window
frames.
Before first Use
Unpack the processing gun for gun foam check all parts for any
damage in transit. Dispose of packaging materials or store it out of
reach of children. Plastic bags etc. may become a deadly toy for
children.
Using, Maintenance and Care
Check the gun for any faults before using it.
Shake the bottle well and remove the closing cap.
Turn the bottle quickly to screw it onto the cartridge holder (1)
(figure b). By acting quickly, one prevents the foam from leaking
out and fouling the adapter. Any foam that may have leaked out
must be removed at once with the appropriate cleaner.
In order to use the bottle, press lightly on the trigger (5) to fill the
gun and the spray pipe (4) with foam. The gun is now ready for
use.
Use the flow regulator (2) on the rear of the gun to regulate the
flow of material. Turn the flow regulator wheel clockwise to re-
duce the flow and/or to obtain a thinner layer; turn counter clock-
wise to increase the flow and or to obtain a thicker layer. This
regulation is required to obtain optimal results.
Troubleshooting
9
Werbung
Inhaltsverzeichnis
