Makita KR401MP Originalbetriebsanleitung Seite 6

First Aid
In case of accident make sure that a first-aid
1.
box is available in the vicinity of the cutting
operations. Immediately replace any item
taken from the first aid box.
2. When asking for help, give the following
information:
Place of accident
—
— What happened
— Number of injured persons
Kind of injuries
—
— Your name
WARNING:
Use of this product can create
dust containing chemicals which may cause
respiratory or other illnesses. Some examples of
these chemicals are compounds found in pes-
ticides, insecticides, fertilizers and herbicides.
Your risk from these exposures varies, depend-
ing on how often you do this type of work. To
reduce your exposure to these chemicals: work
in a well ventilated area, and work with approved
safety equipment, such as those dust masks that
are specially designed to filter out microscopic
particles.
PARTS DESCRIPTION
2
3
4
5
Fig.2
► 1 . Cap 2. Pipe 3. Protector 4. Gear case 5. Rotor
blade 6. Lock pin 7. Clip 8. Hub 9. Hexalobular
wrench
1 9
6
7
8
ASSEMBLY
WARNING:
equipment, switch off the motor and remove the spark
plug cap or battery cartridge. Otherwise the cutting tool
or other parts may move and result in serious injury.
WARNING:
blades, wear protective gloves. During the assem-
bly or adjustment, your fingers may contact with the
rotor blade and it may cause serious injury.
WARNING:
the equipment, always put it down. Assembling or
adjusting the equipment in an upright position may
result in serious injury.
WARNING:
tions in the chapter "SAFETY WARNINGS" and
the instruction manual of the power unit.
Mounting the attachment pipe
CAUTION:
ment pipe is secured after installation. Improper
installation may cause the attachment falling off from
the power unit and cause personal injury.
Mount the attachment pipe to the power unit.
1. Turn the lever toward the attachment.
Fig.3
► 1 . Lever
2.
Align the pin with the arrow mark. Insert the
attachment pipe until the release button pops up. Make
sure that the position line is on the tip of the arrow mark.
Fig.4
► 1. Release button 2. Arrow mark 3. Pin 4. Position line
6 ENGLISH
Before assembling or adjusting the
Before handling the rotor
When assembling or adjusting
Follow the warnings and precau-
Always check that the attach-
1
1
2
3
4