Philips RC670 Bedienungsanleitung Seite 9

AUDIO ADJUSTMENT
ON/OFF
¢ Switch the set on or off:
VOLUME
Please make sure you can still hear the traffic
(horns, sirens:....... )
+ Adjust the volume :
-S>
SOUND
+ Select one of the pre-defined sound styles:
— BASS-TRE : Your own settings of bass and
treble.
— FLAT : Mid-positions of bass and treble
~ JAZZ: Jazz music
— VOCAL : Speech
~ CLASSIC : Classical music
~ ROCK : Rock music
SELECT
« Select the desired audio mode :
SEE or CED
~ BASS (low notes), TREBLE (high notes),
BALANCE (lefi-right), FADER (rear-front).
- Adjust the selected audio mode.
>
After 5 seconds the display goes back to the
last mode of operation.
LOUDNESS
« Activate/deactive Loudness :
a LOUD
3 ~ ED) or Lou Coma
* Depending on version
MUTE (Silence) :
+ Mute the set or cancel the mute :
<>)
The silent period may be interrupted by traffic
announcements (if TA/NEWS is switched on).
SOURCE
¢ Select the desired source :
- Radio
- Cassette/CD player*
- CD Changer * (AUX") (if connected)
-@ Useful tips
Set does not function. No Display.
* Check fuse (set and car) and connections
Set functions but no sound?
* Adjust the volume of the set.
* Check fader and balance settings.
* Check aerial and its connection.
Set mutes when you drive or display shows 'TEL
CALL', but the car telephone is not in used.
* See INITIAL SETTINGS; select Option
'PHONE' and set Choice to 'LO' or 'HI' according
to phone type.
Set mutes when you used the car telephone,
display shows 'TEL CALL', but you may still like
to listen to the radio.
¢ To restore the same volume level
se
Display shows 'TOO HOT' and the sound from
the speakers is reduced.
* Abuilt-in safety circuit prevents the temperature
in the set from exceeding a certain level.
* Wait until "TOO HOT' disappears from the
display before increasing the volume.
Detachable front of set feels warm?
+ Some heat is always generated by the set.