Philips RC670 Bedienungsanleitung Seite 3

*@ Useful tips
Recommended connection instructions between
_ the CD changer and headunit :
1. Ensure that the Connector A (power supply) is
removed from the headunit.
2. Finish all connections between the CD changer
(see mounting instructions for the CD changer)
and the headunit.
3. Reconnect the Connector A (power supply) to
the headunit.
OTHERS CONNECTIONS (fig.2)
Line-output *
* You can connect a power amplifier (with 2 or 4*
additional loudspeaker) to this set with the RCA
cable.
— Connect Red socket to Right channel and white
socket to Left channel.
~ Connect Blue wire to Amplifier Remote on/off.
Wired Remote Control @
You can connect a wired remote control to this
set.
Pink lead wire (Telephone mute) oP MK
~» If your car telephone or the car kit of your mobile
phone provides a mute signal, it can be used to
automatically interrupt the set's sound output.
~ Connect the telephone mute wire to Pink lead
wire (TEL. MUTE).
— See INITIAL SETTINGS; select Option 'PHONE'
and set the Choice to 'LO' or 'HI' according to
phone type.
* Depending on version
Do not operate cellular phones near the set or even
@ Useful tips
in a car without using an outside antenna, it may
cause disturbances to all electrical systems in the
car.
REAR STUD
Screw rubber buffer E onto fixing stud at rear of
set.
AERIAL
Fix antenna adaptor * (EA6257/00) if needed.
ge a Ge « EA6257/00
+ Insert aerial plug into aerial socket (good
reception is only possible with a good aerial).
(Optional) Secure the aerial wire with cable tie.