Battery Status - Husqvarna 120iBV Bedienungsanweisung

Battery
WARNING:
safety chapter before you use the battery.
Read and understand the operator's manual
for the battery and the battery charger.
Keep the battery and the battery charger in the correct
ambient temperatures.
Operation of the battery
Charging of the battery
LED indicator
4 LED lights are on
3 LED lights are on
2 LED lights are on
1 LED light is on
1 LED light flashes
To charge the battery
Charge the battery if it is the first time that you use it. A
new battery is only 30% charged.
CAUTION:
to a power outlet with the voltage and
frequency that is specified on the rating
plate.
The battery does not charge if the battery temperature is
more than 50 °C/122 °F.
1. Connect the power cord to the battery charger.
2. Connect the battery charger to a grounded power
outlet. The charging LED flashes one time.
2034 - 002 - 17.01.2023
Read and understand the
Ambient temperature
5 °C-40 °C / 41 °F-104 °F
5 °C-40 °C / 41 °F-104 °F
Connect the battery charger

Battery status

The display shows the state of charge and if there are
problems with the battery.
Battery state of charge
The battery is 76% - 100% charged.
The battery is 51% - 75% charged.
The battery is 26% - 50% charged.
The battery is 6% - 25% charged.
The battery is 0% - 5% charged.
3. Connect the battery to the battery charger. The
charging LED comes on. Charge the battery for
maximum 24 hours.
4. Push the battery indicator button, if all the LED
indicators come on, the battery is fully charged.
5. Pull the power plug to disconnect the battery charger
from the power outlet. Do not pull the power cord.
6. Remove the battery from the battery charger.
To connect the battery to the product
WARNING:
original batteries in the product.
1. Make sure that the battery is fully charged.
Only use Husqvarna
11