Vacuum Mode - Husqvarna 120iBV Bedienungsanweisung

To assemble the blower tube
Note:
When the blower tube is not assembled
correctly, a safety switch will prevent the blower from
starting.
1. Push the blower tube (A) onto the blower outlet (B).
The interlock (C) engages when you hear a click.
2. Install the blower nozzle (D) onto the blower tube.
The blower nozzle locks in position when you hear a
click.
To assemble the intake cover
Note:
When the intake cover is not assembled
correctly, a safety switch will prevent the blower from
starting.
• Close the intake cover (A) on the blower inlet (B).
The interlock (C) engages when you hear a click.
2034 - 002 - 17.01.2023

Vacuum mode

WARNING:
and the collection bag fully before you use
the product in vacuum mode.
To assemble the vacuum tube
WARNING:
lower vacuum tubes before you start the
product.
Note:
When the vacuum tube is not assembled
correctly, a safety switch will prevent the vacuum from
starting.
1. Align the slots on the upper vacuum tube (A) with the
tabs on the lower vacuum tube (B).
A
C
2. Push the lower vacuum tube onto the upper vacuum
tube until you hear a click.
3. Tighten the screw (C) .
4. Install the vacuum tube (D) to the vacuum inlet (E).
The interlock (F) engages when you hear a click.
F
D
Assemble the vacuum tube
Assemble the upper and
B
E
9