Battery Safety - Husqvarna S 138i Bedienungsanweisung

not stop in 3 seconds, let an approved Husqvarna
service agent adjust the motor brake.
Safety key
The safety key is found below the battery lid. The safety
key is used to connect the battery that supplies the
motor with power.
• Start and stop the motor to do a check of the safety
key.
• If the safety key functions correctly, the motor starts
only when the key is turned to 1.
To examine the start inhibitor
Do a check of the start inhibitor to make sure that it
prevents operation of the motor.
1. Push the motor brake handle in the direction of the
handlebar. The start inhibitor stops the movement.
2. Push the start inhibitor out.
3. Release the start inhibitor and make sure that it goes
back to its initial position.
10
To use the power cord holder (model S 138C)
The power cord holder decreases the strain on the
power socket and the power cord. The power cord
holder also decreases the risk that you fall.
1. Bend the power cord to a small loop.
2. Put the loop in to the hole in the power cord holder.
3. Put the loop around the hook.
4. Pull the power cord to tighten the loop around the
hook.

Battery safety

WARNING: Read the
warning instructions that
follow before you use the
product.
• Use Husqvarna rechargeable
batteries as a power supply for
related Husqvarna products
only. To prevent injury, do not
use the battery as a power
supply for other devices.
• Do not use non-rechargeable
batteries.
• Risk of electrical shock. Do not
connect the battery terminals
to keys, coins, screws or other
metal. This can cause a short
circuit of the battery.
937 - 006 -