Abicor Binzel iROB 501 Originalbetriebsanleitung Seite 105

® ®
iROB 501, iROB 401, iROB
Activating password protection
Canceling password protection
®
301
A V
±
m/min.
sec. %
JOB.No.
Hz
A V
m/min. ±
sec.
%
Hz JOB.No.
A V
±
m/min.
sec. %
JOB.No.
Hz
Set the tens and ones digits in the same way with the
7
<Parameter setting> knob.
Check the password and press <Enter> twice.
8
The password is saved.
Press and hold <Enter> for more than 3 seconds.
1
Password protection is active.
Press and hold <Enter> for at least 3 seconds.
1
<PAS → Loc> flashes alternately in the left digital display.
Set the hundreds digit with the <Parameter setting> knob.
2
Press the <Parameter selection> button.
3
The tens digit starts to flash.
Set the tens and ones digits in the same way with the
4
<Parameter setting> knob.
Press <Enter>.
5
If the number matches the stored password, both digital
displays show <good> and password protection is removed.
If the number does not match the stored password, <bAd> is
displayed on the left digital display.
► Use the <Parameter setting> knob to re-enter the
password as described above.
7 Operation
EN - 25