Noise safety
WARNING:
instructions that follow before you use the
product.
•
High noise levels and long-term exposure to noise
can cause noise-induced hearing loss.
•
To keep the noise level to a minimum, do
maintenance on and operate the product as given
in the operator's manual.
•
Use approved hearing protection while you operate
the product.
•
Listen for warning signals and voices when you use
hearing protection. Remove the hearing protection
when the product is stopped, unless hearing
protection is necessary for the noise level in the work
area.
Personal protective equipment
WARNING:
instructions that follow before you use the
product.
•
Always use approved personal protective equipment
when you operate the product. Personal protective
equipment cannot fully prevent injury but it
decreases the degree of injury if an accident does
occur. Let your dealer help you select the correct
personal protective equipment and when to use
them.
•
Regularly do a check of the condition of the personal
protective equipment.
•
Use approved hearing protection.
•
Use approved respiratory protection.
•
Use approved eye protection with side protection.
•
Use protective gloves.
•
Use boots with steel toe-cap and non-slip sole.
•
Use approved work clothing or equivalent close-
fitting clothing that has long sleeves and long legs.
Fire extinguisher
•
Keep a fire extinguisher near during operation.
•
Use a powder fire extinguisher or a carbon dioxide
fire extinguisher.
Work area safety
WARNING:
instructions that follow before you use the
product.
•
It is the responsibility of the user to analyse the
surface to be treated. The user should make a risk
assessment on the basis of the information obtained
about the surface to be treated and take proper
precautions for the work to be performed.
2070 - 004 - 06.04.2023
Read the warning
Read the warning
Read the warning
•
Do not use the product in fog, rain, strong winds,
cold weather, risk of lightning or other bad weather
conditions.
•
Look out for persons, objects and situations that can
prevent safe operation of the product.
•
Do not use the product in areas where fire or
explosions can occur. The product creates sparks
and flammable material can create ignition with the
dust or fumes.
•
Keep children, bystanders and animals away from
the work area and at a safe distance from the
product. Safe distance is 10 m.
•
Make sure that bystanders and animals are not
in the work area and at a safe distance from the
product.
•
Make sure that only approved persons are in the
work area.
•
Keep the work area clean and fully illuminated.
Cluttered or dark areas invite accidents.
•
Remove objects such as screws, bolts, wires and
stones from the work area before you use the
product.
•
Make sure that there are no cables or hoses in the
operation direction of the product.
•
Make sure that uneven surfaces, such as welded
seams or floor joints, do not stop the product.
•
Make sure that there is sufficient airflow in the work
area.
Electrical safety
WARNING:
shocks from electrical products. Do not use
the product in bad weather conditions. Do
not touch lightning conductors and metal
objects. Always use the product as given in
this operator's manual to prevent injury.
There is always a risk of
9