Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Buttons and Functions
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote
control. The following is a brief introduction to the remote control itself. For instructions on how to
operate your air conditioner, refer to the How to Use Basic Functions
ON/OFF
ON/OFF
Turns the unit on or off.
Turns the unit on or off.
TEMP
Increases temperate in
TEMP
1°C (1°F) increments.
Increases temperate in
Max. temperature is
1°C (1°F) increments.
Max. temperature is
30°C (86°F).
NOTE: Press together
30°C (86°F).
buttons at the same time
NOTE: Press together
for 3 seconds will alternate
buttons at the same time
the temperature display
for 3 seconds will alternate
between the °C & °F.
the temperature display
between the °C & °F.
SET
SET
Scrolls through operation
Scrolls through operation
functions as follows:
functions as follows:
Fresh(
) Follow Me( )
Breeze Away(
)
Sleep
AP mode(
)
Fresh ....
(
) Follow Me(
)
AP mode(
)
Breeze
The selected symbol will
Away ...
flash on the display area,
The selected symbol will
press the OK button to
flash on the display area,
confirm.
press OK button to confirm.
TEMP
Decreases temperature
TEMP
in 1 C(1 F) increments.
O
O
Decreases temperature
Min. temperature is
in 1 C(1 F) increments.
O
O
16 C(60 F).
O
O
Min. temperature is
16 C(60 F).
O
O
FAN SPEED
Selects fan speeds in the
FAN SPEED
following order: AUTO -
Selects fan speeds in the
LOW - MED - HIGH
following order: AU
20%
NOTE: Holding this button
40%
60%
80% 100%.
down for 2 seconds will
activate Silence feature.
Press the TEMP
or
to increase/decrease the fan
speed in 1% increments.
SWING
Starts and stops the horizontal
SWING
louver movement. Hold down
for 2 seconds to initiate vertical
Starts and stops the horizontal
louver auto swing feature.
louver movement. Hold down
for 2 seconds to initiate vertical
louver auto swing feature.
&
&
button
Model:
Model: RG10A1(D2S)/BGEF
MODE
Scrolls through operation modes
as follows: AUTO
DRY HEAT FAN
SLEEP
Saves energy duting
sleeping hours
OK
Used to confirm the selected
TIMER
Set timer to turn unit on or off
FRESH
Used to start/stop the ionizer
Enables unit to reach pr
temperature in shortest
RG10B1(D2S)
possible time
6
section of this manual.
MODE
Scrolls through operation modes
as follows: AUTO COOL
DRY HEAT FAN
NOTE: HEAT mode is not
supported by the cooling only
appliance.
ECO/GEAR
Press this button to enter the
energy efficient mode in a
sequence of following:
functions
ECO
GEAR(75%)
GEAR(50%)
Previous setting
ECO ......
mode
OK
Used to confirm the selected
functions
TIMER
Set timer to turn unit on or off
FRESH
Used to starts and stops the
Fresh feature.
CLEAN
LED
Used to start/stop the Self
Turns indoor unit's LED display
Clean or Active Clean function.
and air conditioner buzzer on and
(Model dependent, please refer
off (model dependent), which
to the USER'S OPERATION &
create a comfortable and quiet
INSTALLATION MANUAL).
environment.
LED
Turns indoor unit's LED display
Turbo
and air conditioner buzzer on and
Enables unit to reach preset
off (model dependent), which
temperature in shortest
create a comfortable and quiet
possible time
environment.
Turbo
Werbung
Inhaltsverzeichnis
