Function Buttons; Αυτόµατη Λειτουργία; Ψύξη/Θέρµανση/ Λειτουργία Ανεµιστήρα - INVENTOR M3GHP290-12 Benutzerhandbuch

Function buttons

1
3
5
7
SHORT CUT
9
I SENSE
11
Model: RG51F/EF
TEMP DOWN Button
1
Push this button to decrease the indoor temper-
ature setting in 1 C(2 F) increments to 17 C(62 F).
TEMP UP Button
2
Push this button to increase the indoor temper-
ature setting in 1 C(2 F) increments to 30 C(88 F).
ON/OFF Button
3
Operation starts when this button is pressed
2
and stops when the button is pressed again.
4
4 FAN SPEED Button
Used to select the fan speed in four steps:
6
Auto
8
10
5 MODE Button
Each time the button is pressed, the operation
12
mode is selected i nt he s equenceo f th e fo llowing:
AUTO
NOTE Please do not select HEAT mode if
the machine you purchased is cooling only
type. Heat mode is not supported by the
cooling only appliance.
6
TIMER ON Button
Press this button to activate the Auto-on time
setting. Each press will increase the time setting
in 30 minutes increments, up to 10 hours, then at
1 hour increments up to 24 hours. To cancel the
Auto-on time setting, just press the button until
the time setting is 0.0.
SWING Button
7
Used to stop or start louver movement and
set the desired up/down airflow direction.
8
ECONOMY/SLEEP Button
Select this function during the sleeping time. It
can maintain the most comfortable temperature
and save energy. This function is available on
COOL, HEAT or AUTO mode only .
NOTE: While the unit is running under ECONOMY/
SLEEP mode, it would be cancelled if press MODE,
FAN SPEED or ON/OFF button.
4
7
o
o
Low Med High
COOL DRY
o
o
HEAT FAN