Fitting The Oven - KKT KOLBE EB8616TFT Benutzerhandbuch

Installation and Fitting the Appliance

8.3 Fitting the oven

Caution! Risk of electric shock!
• Using defective electrical appliances can be dan-
gerous!
Check the oven thoroughly before installation and
do not connect it in case of damage.
• To eliminate risks of electric shock, avoid direct
contact with electrical parts of the oven!
Caution! Risk of injury!
The edges of the unit can be sharp!
Wear protective gloves during assembly, so as not to
injure yourself!
• Prepare the installation opening for the installation of the
oven according to the dimensional specifications as shown
in the illustration before.
• Push the oven fully into the centre of the installation niche,
making sure that the cable is not kinked, crushed or twisted.
• Open the appliance door and attach the oven to the built-in
furniture by screwing the screws supplied into the mount-
ing holes on the left and right of the cooking chamber
frame (If necessary, pre-drill screw holes on the furniture
frame accordingly).
Attention! Risk of damage!
To avoid damage, tighten the mounting screws by
hand and do not and do not overtighten them.
80