Transport, Packaging And Storage; Commissioning, Operation; Functional Check - WIKA BLR Betriebsanleitung

4. Transport ... / 5. Commissioning, operation

4. Transport, packaging and storage

4.1 Transport
Check the reed sensor for any damage that may have been caused by
transport. Obvious damage must be reported immediately.
CAUTION!
With improper transport, a high level of damage to property
can occur.
▶
Observe the symbols on the packaging
▶
Handle packed goods with care
4.2 Packaging and storage
Do not remove packaging until just before commissioning.
Keep the packaging as it will provide optimum protection during transport
(e.g. change in installation site, sending for repair).

5. Commissioning, operation

Observe all instructions given on the shipment packaging for
■
removing the transportation safety devices.
Remove the reed sensor carefully from the packaging!
■
When unpacking, check all components for any external damage.
■

5.1 Functional check

Prior to installation, a functional test of the reed sensor can be carried
out with a resistance measuring instrument and manual movement of the
float.
Operating instructions reed sensor, model BLR
EN
11