Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6. Faults
6. Faults
The following table contains the most frequent causes of
faults and the necessary countermeasures.
Faults
No signal,
non-linear or
undefined signals
CAUTION!
Physical injuries and damage to property and the
environment
If faults cannot be eliminated by means of the listed
measures, the instrument must be taken out of operation
immediately.
▶
Ensure that there is no longer any pressure present and
protect against being put into operation accidentally.
▶
Contact the manufacturer.
▶
If a return is needed, please follow the instructions given
in chapter 8.2 "Return".
Operating instructions reed sensor, model BLR
Causes
Electrical connection
incorrect
Measuring chain defective Return to the manufacturer
Head-mounted transmitter
defective
Head-mounted transmitter
adjusted incorrectly
Measures
See chapter 5.3 "Electrical
connection". Check assignment
with the aid of the connection
diagram.
EN
15
Werbung
Inhaltsverzeichnis
