Transport, Packaging And Storage; Transport; Packaging And Storage - WIKA T16.H Betriebsanleitung

4. Transport, packaging and storage

4. Transport, packaging and storage

4.1 Transport

Check the instrument for any damage that may have been caused by transport.
Obvious damage must be reported immediately.
EN
CAUTION!
Damage through improper transport
With improper transport, damage to property can occur.
▶
If the instrument is transported from a cold into a warm environment, the formation of
condensation may result in instrument malfunction. Before putting it back into operation,
wait for the instrument temperature and the room temperature to equalise.

4.2 Packaging and storage

Do not remove packaging until just before mounting.
Permissible conditions at the place of storage:
Storage temperature: -40 ... +85 °C
■
Humidity: 95 % r. h. (condensation permitted)
■
Avoid exposure to the following factors:
Direct sunlight or proximity to hot objects
■
Mechanical vibration, mechanical shock (putting it down hard)
■
Soot, vapour, dust and corrosive gases
■
12
Do not use transmitters with any damage to the exterior!
WIKA operating instructions model T16