Ex Marking - WIKA T16.H Betriebsanleitung

3. Safety

3.6 Ex marking

DANGER!
Danger to life due to loss of explosion protection
Non-observance of these instructions and their contents may result in the
loss of explosion protection.
▶ Observe the safety instructions and further explosion instructions in these
operating instructions.
▶
Follow the requirements of the ATEX directive.
▶
Observe the information given in the applicable type examination
certificate and the relevant country-specific regulations for installation and
use in hazardous areas (e.g. IEC 60079-14, NEC, CEC).
Check whether the classification is suitable for the application. Observe the relevant
national regulations.
Model overview of European approvals
Model
T16.H-AI
(Head mounting version)
T16.R-AI
(Rail mounting version)
T16.x-AC
T16.x-AN
T16.x-AE
WIKA operating instructions model T16
Ex marking
BVS 17 ATEX E039 X
IECEx BVS 17.0033X
II 1G Ex ia IIC T6 ... T4 Ga
II 1D Ex ia IIIC T135 °C Da
II 2(1)G Ex ia [ia Ga] IIC T6 ... T4 Gb
II 2(1)D Ex ia [ia Da] IIIC T135 °C Db
II 3G Ex ic IIC T6 ... T4 Gc X
II 3G Ex nA IIC T6 ... T4 Gc X
II 3G Ex ec IIC T6 ... T4 Gc
Ignition protection type
Intrinsically safe equipment
Intrinsically safe equipment
Intrinsically safe equipment
Non-incendive equipment
Non-incendive equipment
EN
11