Changing Hotkeys - G&D VisionXS-IP-C-DP-HR Installation Und Bedienung

Configuration

Changing hotkeys

If many applications that use hotkeys are running on a computer, or if different KVM
devices are used in a cascade, the number of available hotkeys may be limited.
If an application or another device in the cascade uses the same hotkey, the hotkey
can be changed.
NOTE: Select your desired key or key combination from the keys Ctrl, Alt, Alt Gr,
Win or Shift.
How to change the current hotkey:
1. Open the remote OSD of the computer module by pressing the
(default:
Ctrl+Num
Open the local OSD of the console module by pressing the
(default: Alt+Num
2. Select the row
3. Select the row
4. Under Modifier
the box with the arrow keys. Press
 Ctrl key (default for remote hotkey)
Ctrl
 Alt key (default for local hotkey)
Alt
Alt Gr  Alt Gr key
Win  Windows key
Shift  Shift key
5. Press to save your settings.
F2
73 · G&D VisionXS-IP-C-DP-HR
), if you want to change the hotkey for the remote OSD.
), if you want to change the hotkey for the local OSD.
and press
System setup
Hotkey and press Enter
, select at least one of the listed hotkey modifiers by selecting
(remote OSD) or
Enter
.
F8 to confirm your selection:
remote hotkey
local hotkey
(local OSD).
F11