Installation
Connecting the computer's video output
Line In
Line In
Serial
Serial
Use the DP-Cable-M/M-2 cable to connect the computer's video output to
DP CPU:
this interface.
NOTE:
The DH variants allow the transmission of two separate video signals via
one transmission cable.
Line In
Line In
Serial
Serial
DP CPU 1:
Use the DP-Cable-M/M-2 cable to connect the computer's first video output
to this interface.
Use the additional DP-Cable-M/M-2 cable to connect the computer's sec-
DP CPU 2:
ond video output to this interface.
Connecting audio and RS232 interfaces (depending on model)
Line In
Serial
NOTE:
By default, the KVM extender transfers audio data. The transmission of
RS232 data is deactivated.
You can enable the transmission of RS232 data and/or disable the transmission of
audio data (see (De)Activating signals on page 36).
Use an Audio-M/M-2 audio connection cable to connect the omputer's Line-
Line In:
Out interface to this interface
Serial:
Use the RS232-M/F-2 cable to connect one of the computer's 9-pin serial inter-
faces to this interface.
9 · G&D VisionXS-IP-C-DP-HR
USB CPU
USB CPU
DP CPU
USB CPU
USB CPU
DP CPU 1
USB CPU
USB CPU
DP CPU
DP CPU
DP CPU 2