Status Leds - G&D VisionXS-IP-C-DP-HR Installation Und Bedienung

Status LEDs

The LEDs on the back panel of the computer module and the console module let
you control the operational status of the KVM extender at any time.
Transmission 1 Transmission 2 Service
Area Color
Transmission green
yellow
red
Network green
yellow
Pwr green
yellow
blue
Network Pwr Main Power Main Power
Status Meaning
on Logged on at G&D remote station.
on Communication with a G&D remote station has been
established.
blinking Connection to a remote station/network switch
established.
an Cable plugged into port that is not activated.
Unlock the port with a feature key.
off Connection to remote station has not been
established.
on The connection to the network has been
successfully established.
on A connection could not be established.
on The KVM extender is supplied with voltage and the
device software has been started successfully.
on The KVM extender is supplied with voltage.
on On as soon as the LED has been activated via
web application.
off The KVM extender is not supplied with voltage.
Red. Power Red. Power
G&D VisionXS-IP-C-DP-HR · 98
Status LEDs