Configuring Global Network Settings - G&D VisionXS-IP-C-DP-HR Installation Und Bedienung

Initial configuration of the network settings

Configuring global network settings

Even in complex networks global network settings ensure that the KVM extender is
available from all partial networks.
How to configure global network settings:
1. Use the local hotkey
work interface of the console module or use the
open the remote OSD to configure the network interface of the computer module.
2. Select the entry
3. Select the entry
4. Enter the following data under
Global
preferences:
Hostname:
Domain:
Gateway:
DNS Server 1:
DNS Server 2:
5. Press to save your settings.
F2
21 · G&D VisionXS-IP-C-DP-HR
(default: Alt + Num
Network setup and press
and press
Interfaces
Main Network
Press F8 to select the global preferences:
uses static settings.
 Static:
 DHCP: obtains settings from a DHCP server.
Enter the device hostname.
Enter the domain the device is to belong to.
Enter the gateway IP address.
Enter the IP address of the DNS server.
Optionally, enter the IP address of another DNS server.
) to open the local OSD to configure the net-
remote hotkey
Enter .
.
Enter
:
(default: Ctrl + Num ) to