Changing Hotkeys - G&D VisionXS-IP-F-DP-UHR Installation Und Bedienung

Changing hotkeys

If many applications that use hotkeys are running on a computer, or if different KVM
devices are used in a cascade, the number of available hotkeys may be limited.
If an application or another device in the cascade uses the same hotkey, the hotkey
can be changed.
NOTE:
Select your desired key or key combination from the keys Ctrl, Alt, Alt Gr,
Win or Shift.
How to change the current hotkey:
1. Open the remote OSD of the computer module by pressing the
(default:
Ctrl+Num
Open the local OSD of the console module by pressing the
(default: Alt+Num
2. Select the row
3. Select the row
4. Under
Modifier
the box with the arrow keys. Press
Ctrl  Ctrl key (default for remote hotkey)
 Alt key (default for local hotkey)
Alt
 Alt Gr key
Alt Gr
Win  Windows key
Shift  Shift key
5. Press F2 to save your settings.
), if you want to change the hotkey for the remote OSD.
), if you want to change the hotkey for the local OSD.
System setup and press
Hotkey and press Enter .
, select at least one of the listed hotkey modifiers by selecting
F8
Enter (remote OSD) or
to confirm your selection:
G&D VisionXS-IP-F-DP-UHR · 74
Configuration
remote hotkey
local hotkey
F11 (local OSD).