Selecting A Keyboard Layout For Inputs Via Osd - G&D VisionXS-IP-F-DP-UHR Installation Und Bedienung

Selecting a keyboard layout for inputs via OSD

If the OSD displays characters other than those typed on the console keyboard, the
keyboard layout must be adjusted.
Find out which keyboard layout is used by the connected keyboard and configure it
in the console module settings.
How to change the keyboard layout of the keyboard of the console module:
1. Open the remote OSD of the computer module by pressing the
(default: Ctrl+Num
Open the local OSD of the console module by pressing the
(default:
Alt+Num
2. Select the row
row Keyboard/Mouse
3. Under
OSD key. layout

german
 english US
 english UK

french

spanish
 lat. americ.
 portuguese

swedish

swiss-french
 danish
4. Press F2 to save your settings.
), if you want to change the hotkey for the remote OSD.
), if you want to change the hotkey for the local OSD.
Console setup and press
and press Enter (local OSD).
press to select one of the following options:
F8
Enter (remote OSD) or
G&D VisionXS-IP-F-DP-UHR · 88
Configuration
remote hotkey
local hotkey
F11 , select the