Checking The Availability Of A Host In The Network (Ping) - G&D VisionXS-IP-F-DP-UHR Installation Und Bedienung

Initial configuration of the network settings

Checking the availability of a host in the network (Ping)

The OSD can be used to test the availability of a particular host (e. g., a computer or
a network device) in the network.
How to check the availability of a host in the network:
1. Use the local hotkey
use the remote hotkey
module. Select the entry
2. Select the entry
3. Use the entry to enter the IP address or the host name and press
Host
4. The test results are displayed in the following table:
Transmitted:
Received:
Lost:
Min. RTT:
Avg. RTT:
Max. RTT:
NOTE: A message informs the user if the host name cannot be resolved into an
IP address.
5. Press Esc to leave the menu.
23 · G&D VisionXS-IP-F-DP-UHR
(default: Alt + Num
(default: Ctrl + Num
Network setup
Ping host and press
number of transmitted data packets
number of received data packets
number of lost data packets
minimum round-trip-time
average round-trip-time
maximum round-trip-time
) to open the local OSD of the console module or
) to open the remote OSD of the computer
and press Enter .
Enter .
.
Enter