Scheppach DS930 Original Bedienungsanleitung Seite 23

h.) Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action
can cause severe injury within a fraction of a sec-
ond.
Power tool use and care
a.) Do not overload the device. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
b.) Do not use the power tool if the switch does
not turn it on and off. Any electric tool that can-
not be controlled with the switch is dangerous and
must be repaired.
c.) Remove the plug from the socket and/or re-
move the rechargeable battery before setting
the device, changing accessories or putting
the electric tool away. Such preventive safety
measures reduce the risk of starting the power
tool accidentally.
d.) Store idle power tools out of the reach of chil-
dren and Do not let people use the electric tool
who are not familiar with it or who have not
read these instructions. Power tools are danger-
ous in the hands of untrained users.
e.) Maintain the electric tool with care. Check
whether moving parts function properly and
do not get stuck and whether parts are broken
or are damaged and thus adversely affect the
electric tool function. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f.) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g.) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the power
tool for operations different from those intended
could result in a hazardous situation.
h.) Keep handles and grasping surfaces dry,
clean and free from oil and grease.
Slippery handles and grasping surfaces do not
allow for safe handling and control of the tool in
unexpected situations.
Service
a.) Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
Warning! This power tool generates an electromag-
netic field during operation. This field can impair ac-
tive or passive medical implants under certain condi-
tions. In order to prevent the risk of serious or deadly
injuries, we recommend that persons with medical
implants consult with their physician and the manu-
facturer of the medical implant prior to operating the
power tool.
Machine-specific safety instructions
a.) This machine is not intended for grinding.
Read all safety instructions, instructions, figures
and descriptions supplied with this machine. Fail-
ure to comply with the following instructions may
result in an electric shock, fire and/or serious in-
jury.
b.) Work such as rough grinding, brushing, pol-
ishing or cut-off grinding must not be carried
out with this machine. Work for which the ma-
chine was not designed can cause danger and
personal injury.
c.) Do not use any accessories that have not been
specially designed and intended for this ma-
chine by the manufacturer. Just because an
accessory can be fitted to your machine does not
guarantee safe operation.
d.) The permitted speed of the accessory must be
at least as great as the maximum speed speci-
fied on the machine. Accessories that rotate fast-
er than permitted can shatter.
e.) Insert tools with threaded inserts must fit ex-
actly on the thread of the grinding spindle. For
tool attachments that are mounted by means
of a flange, the hole diameter of the insert tool
must match the mounting diameter of the flange.
Insert tools which are not precisely attached to the
electric tool rotate unevenly, vibrate very strongly
and can cause a loss of control.
f.) The bore diameter of washers, flanges, sup-
port plates and all other accessories must
exactly match the spindle of the machine. Ac-
cessories with a bore diameter that does not fit run
out of round, vibrate excessively and can lead to
loss of control.
www.scheppach.com GB | 23