Transport - HOLZMANN-MASCHINEN HOB260ECO Betriebsanleitung

Injuries due to defective blades. Check the saw blade regularly for damage.
•
Risk of injury from tools, especially when changing tools.
•
Risk of injury due to kick back of the workpiece.
•
Risk of electric shock if incorrect electrical connections are used.
•
Residual risks can be minimized if the "Safety instructions" and the "Intended use" as well as the
operating instructions are observed.
Due to the design and construction of the machine, hazardous situations may occur when handling
the machines, which are identified as follows in this operating instruction:
A safety instruction designed in this way indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
Such a safety instruction indicates a potentially hazardous situation which, if not
avoided, may result in serious injury or even death.
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Irrespective of all safety regulations, their sound common sense and corresponding technical
suitability/training are and remain the most important safety factor in the error-free operation of
the machine. Safe working depends first and foremost on you!

TRANSPORT

Damaged or not sufficiently viable hoists and lifting devices can cause serious injury or
even death. Always check hoists and load lifting devices for adequate load-bearing
capacity and perfect condition, carefully fasten the loads and never keep them under
suspended loads.
To ensure proper transport, also observe the instructions and information on the transport
packaging regarding centre of gravity, attachment points, weight, means of transport to be used
and the prescribed transport position, etc. Lifting and transporting the machine may only be
carried out by qualified personnel with appropriate training for the lifting equipment used.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
D A N G E R
W A R N I N G
C A U T I O N
N O T E
W A R N I N G
Transport the machine in its packaging to the
installation site. To manoeuvre the machine in the
packaging, a pallet truck or a forklift with
appropriate lifting power can be used.
TRANSPORT
34
HOB260ECO