Overload Protection; Counter Bearing Rollers - probst EASYFILL EF-H Betriebsanleitung

Maintenance and care
6.1.2

Overload protection

To be checked from time to time for function, on breakdown (spinning of overload protection (1) in Pic.2) during the
operation) retighten the screws (turning moment maximal 25 Nm (Ruflex 011TF).
Grease half-yearly the grease-nipples (2) on the bearings of the overload protection (see picture 2) with a grease
gun.
6.1.3

Counter bearing rollers

The correct setting of the counter bearing rollers (3) is responsible for creating the forward drive.
The counter bearing rollers (3) are pre-set (by the manufacturer) to have a pretension of about 2-3 mmThe counter
bearing rollers (3) (41700018) have to be checked from time to time, whether they are equally supporting the two
large gear wheels (2) (41700019).
Is this not the case, the counter bearing rollers (3) have to be adjusted a little by the adjustment screws (1).
51700003
Picture2
Picture 3
12 / 17 GB