Mounting The C10 As Delivered With An Adapter (Standard Version) - HBK C10 Montageanleitung

F : Force in direction of measurement
nom
F : Force parallel to direction of measurement,
ex
but outside center of force transducer
F : Force vertical to direction of measurement
Q
M : Bending moment
b
M : Torque
d
Fig. 6.1 Parasitic forces and moments
Notice
During installation and when the force transducer is operating, comply with the maximum
parasitic forces and moments: maximum eccentricity and lateral forces. The limits of the
sensor's load-carrying capacity can be found in Chapter 11 "Specifications" on Page 30.
6.3

Mounting the C10 as delivered with an adapter (standard version)

In this assembly variant, you can mount the C10 directly onto your structural elements, or
place it on a suitable substructure. The force transducer measures static and dynamic
compressive forces, and can be used at full oscillation width.
Force application is implemented via the convex load button on the top of the force
transducer. We recommend using our thrust pieces, to ensure ideal force application.
These thrust pieces, which are placed on the convex load button, have a suitable surface
quality.
14
F
Q
e
n
F
nom
M
b
M
d
MECHANICAL INSTALLATION
F
ex
C10