Startup Guide - Grundfos MGE Serie Montage- Und Betriebsanleitung

5.1.3.1 Home display
1 2
Home
Status Settings Assist
Setpoint Control mode
5.00 bar
Const. pressure
Operating mode Actual controlled value
Normal
4.90 bar
1
9 8 7 6
Setpoint
5.00 bar
1
Pos. Symbol Description
1 Home: This menu shows up to four user-defined parameters. You can access each parameter directly from this menu. 1
Operaring mode
2 - Status: This menu shows the status of the product and system, warnings and alarms.
1
Setpoint
3 - Settings: This menu gives access to all setting parameters. The menu also allows you to make detailed settings.
1
5.00 bar
4 - Assist: This menu enables assisted setup, provides a short description of the control modes and offers fault-finding advice.
Setpoint
5.00 bar
5 Start/Stop: The icon indicates that the product was stopped with the Start/Stop button.
1
Setpoint
Operaring mode
5.00 bar
6 Master: The icon indicates that the product is functioning as the master in a system with products of the same type and size.
Setpoint
Operaring mode
5.00 bar
7 Slave: The icon indicates that the product is functioning as a slave in a system with products of the same type and size.
Setpoint
Operaring mode
8 Multioperation: The icon indicates that the product is operating in a system with products of the same type and size.
5.00 bar
Operaring mode
9 Lock: The icon indicates that the possibility to make settings has been disabled for protective reasons.
Operaring mode

5.1.3.2 Startup guide

The function is only available in the advanced operating panel.
The startup guide starts at the first startup and guides you through the settings needed for the product to operate in the given application.
When the startup guide has been completed, the main menus appear in the display.
You can always run the startup guide at a later time.
5.1.3.3 Menu overview for the advanced operating panel
Home
Status
Operating status
Pump performance
Power and energy consumption
Measured values
32
3 4
2 3
Status Settings Assist
5
Control mode
Const. pressure
2 3
2 3
Actual controlled value
Status Settings Assist
2 3
Normal
4.90 bar
Control mode
Status Settings Assist
2 3
Const. pressure
Control mode
Status Settings Assist
Const. pressure
2 3
Control mode
Status Settings Assist
Actual controlled value
Const. pressure
Normal 9 8 7 6 5
Control mode
4.90 bar
Actual controlled value
Status Settings Assist
Const. pressure
Normal
4.90 bar
Control mode
Actual controlled value
Const. pressure
Normal
4.90 bar
Actual controlled value
Normal
4.90 bar
9 8 7 6 5
Actual controlled value
9 8 7 6 5
Normal
4.90 bar
9 8 7 6 5
9 8 7 6 5
9 8 7 6 5
MGE
•
Operating mode, from
Control mode
Actual controlled value
Resulting setpoint
Speed
Acc. flow and specific energy
Analog input 1
Analog input 2
Analog input 3
Pt100/1000 input 1
Multimotor system
•
*
*
MGE Multimotor system
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •