Hazards Due To Operating Materials; Property Damage - RK Rose+Krieger RK MonoLine R Montageanleitung

Safety
Residual risks > Property damage

2.3.4 Hazards due to operating materials

Lubricants

2.3.5 Property damage

Overloading the timing belt
82
WARNING!
Risk of injury due to hot surfaces!
The surface of the pulley box can heat up signifi-
cantly due to the heat transfer of a mounted gear
unit and/or motor in operation.
Skin contact with hot surfaces can lead to severe
burns.
– Wear heat-resistant protective clothing and pro-
– Before starting any work, ensure that all sur-
CAUTION!
Harm to health due to lubricants!
Contact with lubricants (greases and oils) can
cause allergies and irritate the skin and eyes.
– When handling lubricants and cleaning agents,
– Observe the safety data sheets for the lubri-
NOTICE!
Property damage due to overloading the timing
belt!
The timing belt tension is pre-set by
RK Rose+Krieger GmbH. Higher loads deviating in
the application can cause property damage due to
the timing belt slipping.
– Adjust the tension of the timing belt to the higher
Linear unit RK MonoLine R/RK MonoLine Z
tective gloves when carrying out any work in the
vicinity of hot surfaces.
faces have cooled down to the ambient tem-
perature.
wear protective clothing, safety goggles, protec-
tive gloves and, if necessary, respiratory protec-
tion.
cants used.
load. Please contact RK Rose+Krieger GmbH
for this purpose.
14.10.2021