RK Rose+Krieger RK MonoLine R Montageanleitung Seite 101

Assembling the motor
Fig. 22: Assembling the motor
14.10.2021
10. Place the motor (Fig. 22/3) on the motor plate (Fig. 22/2).
11. Tighten 4 screws (Fig. 22/1) alternating diagonally:
Size
40
60, 80
120
ð The motor is assembled.
Linear unit RK MonoLine R/RK MonoLine Z
Assembling optional modules > Assembling the motor
Ensure that the clamping hub on the motor
shaft engages correctly in the screw-in hub
on the timing belt shaft.
Screw size Tightening torque [Nm]
M5 5.9
M6 10
M5 5.9
M6 10
M8 25
M10 49
M12 85
Refer to the table for the screw size and the
associated tightening torque which corre-
spond to the motor to be installed.
Assembly
101