EKOM DK50 2x4VR/110 Benutzerhandbuch Seite 48

 Disconnect the hose (2) from the lower part of the condensate separator (3) (Fig. 26).
The process of manually venting pressure from the equipment is complete after approximately 2
minutes.
18.12. Replacement of the dryer´s internal filters
Working with pressurised pneumatic components poses a risk of injury.
Prior to any work, disconnect the equipment from the mains, shut off the
compressor and vent all pressure in the equipment to zero.
In normal operation, filter replacement must be performed in the upper part of the dryer at the
defined interval.
NP-DK50 2x4VR 110-AD-A-1_09-2020
Fig. 25: Venting pressure from the dryer chambers
Fig. 26: Venting pressure from the cooler and condensate separator
48
PRODUCT MAINTENANCE
09/2020