urmet 1092/602 Bedienungsanleitung Seite 78

Dwell – is the dwell time before the next action is activated; values from 1 to 9 can be selected; press the
button OPEN to select the desired dwell time.
Note
In order to ensure that the action number is active, enter all the required parameters listed before.
10.5.8.3 Pattern – definition of the configurable path
Select PATTERN and press OPEN to access the following submenu:
Option
Number
Name
Program a Pattern
Run a Pattern
Delete a Pattern
Name Display
DS1092-090
Pattern
>1 Number
2 Name
3 Program a Pattern
4 Run a Pattern
5 Delete a Pattern
6 Name Display OFF
IRIS CLOSE to Exit
Value
1 ÷ 3
/
/
/
/
ON/*OFF
1
Description
This option allows to identify the Patterns (paths) to
be stored. Up to 3 Patterns max. can be selected.
This operation allows to give a name to the stored
patterns. Press OPEN twice to access the screen where
to give a name to patterns (see below).
This option allows to store patterns. With the arrow
buttons, move on the initial shot to be stored. Press
OPEN and move following the path to be stored. At the
end of the path press again CLOSE to confirm pattern
storing.
This option allows to activate the selected pattern.
This option allows to delete the selected pattern by
pressing the button OPEN twice.
If ON, this option allows to see on the display the
name previously stored and associated to the displayed
pattern.
78