Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
10.5.7.4 Focus– zoom adjustment
This function allows to access the submenu used to set dome adjustments.
Select this item and press OPEN to access the following submenu:
MODE
ZOOM TRK
ZOOM SPEED
D-ZOOM
DISP ZOOM MAG
ZOOM POS INIT
LENS INIT
END
Option
MODE
ZOOM TRK
ZOOM SPEED
D-ZOOM
DISP ZOOM MAG
ZOOM POS INIT
LENS INIT
END
DS1092-090
FOCUS SETUP
MANUAL
ON
FAST
OFF
ON
ON
Value
MANUAL ÷ AUTO ÷
ONE-PUSH
ON ÷ OFF
FAST ÷ SLOW
ON ÷ OFF
ON ÷ OFF
ON ÷ OFF
Description
It allows to select dome focusing mode
(see below).
If the selected option is ON, the dome
will perform a continuous autofocus.
It
allows
to
select
speed. The function can NOT be activated
if the option MODE is AUTO and the option
ZOOM TRK is ON (see below).
It allows to enable/disable the digital
zoom. If enabled, the percentage of zoom
value can be adjusted (x2 min. – x10 max.)
(see below).
If the selected option is ON, the display
shows the active zoom setting (x2 min. –
x10 max). With D-ZOOM function active, the
value can be x100 max.
FUNCTION NOT ACTIVE
This
function
performs
initialization (see below).
This function allows to quit the sub menu.
69
the
dome
focusing
the
dome
lens
Werbung
Kapitel
Inhaltsverzeichnis
