Enter Patient And User Ids Using The Optional Bar Code Scanner; Select Cartridge Type - Medtronic ACT Plus Benutzerhandbuch

ACT_CH.fm 6/23/04 1:23 pm
UC200304151c ML
5.5" x 7.75" (139.7 mm x 196.85 mm)
6. After entering the last alpha character or number of the User ID, press [Enter]
to confirm the ID.
7. A message will appear, "Load Cartridge, Close Actuator."
8. To return to the Main Menu, press [Main Menu]. A message will appear at the
top of the screen, "Verify Patient and User ID."
Enter Patient and User IDs Using the Optional Bar Code
Scanner
A Patient ID must be entered before a test can be run. A User ID must be entered
if the User ID option has been turned ON.
From the Main Menu:
1. Select [Enter ID]. The Enter ID screen will appear with options for entering
Patient and User ID numbers.
To enter a Patient ID:
1. Select [Patient ID].
2. Scan the Patient ID from the patient band.
3. The Patient ID will appear in the upper right-hand corner of the Enter ID
screen.
To enter a User ID:
1. Select [User ID].
2. Scan the User ID from the user's badge.
3. A message will appear, "Load Cartridge, Close Actuator."
4. To return to the Main Menu, press [Main Menu]. A message will appear at the
top of the screen, "Verify Patient and User ID."

Select Cartridge Type

The cartridge type (including the electronic control) should be selected or verified
before each test.
From the Main Menu:
1. Select [Cartridge Type].
2. To view the complete list of choices, [HR-ACT], [LR-ACT], [HTC], [RACT],
[GPC], and [ACTtrac
3. To confirm the selection, press [Enter].
20 English
86702-001 Rev 1.0
®
], continue to press [Cartridge Type].
ACT Plus™ Operator's Manual
Medtronic Confidential
CS010