Maintenance, Overhaul, Repair; Maintenance; Overhaul; Repairs - Stahl 8485 Serie Betriebsanleitung

9

Maintenance, Overhaul, Repair

▶
Observe the relevant national standards and regulations in the country of use,
e.g. IEC/EN 60079-14, IEC/EN 60079-17, IEC/EN 60079-19.
9.1

Maintenance

Check the following points in addition to the national regulations:
• Whether the clamping screws holding the electrical lines fit securely
• Whether the device enclosure and/or protective enclosure has/have cracks or other visible
signs of damage
• Whether the permissible temperatures are complied with
• Whether the parts are securely fitted
• Ensure it is being used as intended.
9.2

Overhaul

Check the following points at least every 6 months:
• The condition of the enclosure and the cable entries
• Quality of all contact connections
• Damage to the surface of the flameproof flame path
• Corrosion at the flameproof flame path
• Dust and dirt on the surfaces of the enclosure
▶
Perform overhaul of the device according to the applicable national regulations and the
safety notes in these operating instructions ("Safety" chapter).
9.3

Repairs

▶
Repair work on the device must be performed only by R. STAHL.
10

Returning the Device

▶
Only return or package the devices after consulting R. STAHL!
Contact the responsible representative from R. STAHL.
R. STAHL's customer service is available to handle returns if repair or service is required.
▶
Contact customer service personally
or
▶
Go to the r-stahl.com website.
▶
Under "Support" > "RMA" > select "RMA-REQUEST".
▶
Fill out the form and send it.
You will automatically receive an RMA form via email. Please print this file off.
▶
Send the device along with the RMA form in the packaging to
R. STAHL Schaltgeräte GmbH (refer to chapter 1.1 for the address).
204166 / 848560300010
2021-08-06·BA00·III·en·12
Maintenance, Overhaul, Repair
Grounding monitoring device
Series 8485
DE
EN
FR
IT
ES
RU
NL
DK
SE
FI
PT
GR
PL
CZ
SK
HU
SL
RO
BG
LV
LT
EE
CH
KR
CN
29