New Pass Code - struers Exotom-100 Gebrauchsanweisung

New Pass Code

Exotom-100
Instruction Manual
To select your own pass code, go to the CONFIGURATION menu.
Select Operation mode to get access to CHANGE OPERATION
MODE menu.
Push knob to select Pass code
D
Turn knob until default pass code '176' appears.
D
Push knob to select default pass code, and a new line
(New pass code) appears in the CHANGE OPERATION
MODE menu.
D
Turn knob to move the cursor to New Pass Code.
D
Push knob to select and turn knob to set your own
three-digit pass code.
D
m Press Menu button to confirm your unique pass code
and exit the CHANGE OPERATION MODE menu.
23