General Safety Instructions; Conformity To Standards; Transport And Storage - Stahl SolConeX 8581/31-Serie Betriebsanleitung

4

General Safety Instructions

The devices must be used only for the permitted purpose. Incorrect or impermissible use
or non-compliance with these instructions invalidates our warranty provision. 
Any alterations and modifications to the device impairing its explosion protection are not
permitted. Use the device only if it is undamaged and clean.
Installation, maintenance, overhaul and repair may only be carried out by appropriately
authorised and trained personnel.
Observe the following information during installation and operation:

Any damage can invalidate the explosion protection

National and local safety regulations
 National and local accident prevention regulations
 National and local assembly and installation regulations (e.g. IEC/EN 60079-14)

Generally recognized technical regulations
 Safety instructions in these operating instructions
 Characteristic values and rated operating conditions on the rating and data plates

Additional instruction plates fixed directly to the device
5

Conformity to Standards

The relevant standards are listed in the EC Declaration of Conformity or IECEx Certificate
of Conformity. These documents are available for download in the download area on the
internet page www.stahl-ex.com.
6

Transport and Storage

 Transport and storage are only permitted in the original packing.
205582 / 8581615300
2011-07-22·BA00·III·en·00
WARNING
SolConeX Switch Socket
8581/31
General Safety Instructions
3