Playing Cds; Forward / Backward Track; Skipping; Intro Scan - JVC KD-NX10 Bedienungsanleitung

Playing CDs

Press button. If the unit was last
set to CD changer operation or there is
no CD (or navigation CD) in the CD
drive, the CD changer menu is now ac-
tive.
If CD operation was last selected, use
the multifunction button
to CD changer operation.
The last CD to be played is played from
the position at which it was left before
switching off.
To select a CD, press right rotary
control , then rotate the control.
If no CD is present in the selected mag-
azine compartment (e.g. compartment
2), the next CD will be played back.
After playing the last track of a CD, the
next CD is automatically selected and
played.

Forward / backward track

skipping

Turn right rotary control
left.
Through further turning of the right rota-
ry control , several tracks can be
skipped over in forward or reverse direc-
to switch
tions.
Note:
The unit switches to the first track once
the last track is reached. In a similar
manner, it switches from the first track
back to the final track.
If a track has been playing for more
than 10 seconds when the right rotary
encorder is turned, the unit will skip
back to the beginning of the selected
track.
CD changer operation

Intro scan

Pressing the
ton activates intro scan function.
to right /
appears on the display.
All following tracks on the current CD
are played for 15 seconds each. Press the
multifunction button again to ter-
minate intro scan.
multifunction but-
171