Regionalisation; Switching Regionalisation On / Off; Turning Frequency Display On Or Off - JVC KD-NX10 Bedienungsanleitung

Radio operation

Regionalisation

The RDS diversity function is independ-
ent of region. As a result, the RDS diver-
sity function can lead to the radio
switching between various regional pro-
grammes which may vary in terms of
broadcasting content. In such a case, the
special regional programming must be
selected directly.
If several regional programmes are
transmitted by one station, this can only
be seen when the station is selected.
Stations with additional regional trans-
mitters are indicated with a star (i.e.
Upon selection of one of these stations
(e.g. 4* ), all receivable regional sub-
programmes for this station will be dis-
played.
154
Afterward, select the desired regional
sub-programme (i.e.
Note:
If the signal quality of a regional alter-
native drifts despite the RDS Diversity
function, it may mean that regional al-
ternatives are only transmitted on a few
frequencies. Therefore, there are fewer
frequencies with strong signals availa-
4* ).
ble for the unit to switch to.
Switching regionalisation on /
off
Selecting radio menu mode.
).
Use multifunction button
Regionalisation on (
Turning frequency display on
or off
Selecting radio menu mode.
Use the
select either
display on) or
play off).
to turn
) or off ( ).
on off
multifunction button to
Frequency (Frequency
PTY (Frequency dis-